| 01:10 |
Electronics Module failure. |
Replace the Electronics Module |
| 01:11 |
The Electronics Module is incorrectly positioned. |
Reseat the Electronics Module by Removing it from the Printer and installing it again in the correct position. |
| 01:12 |
Electronics Module failed during the firmware upgrade OR the Electronics |
Module failed during initialization. |
| 02:10 |
Carriage failure. |
Replace the Carriage Assembly |
| 02:10 |
Carriage failure. |
Replace the Carriage Assembly |
| 04:13 |
Generic Firmware Error (Network Card). |
Unplug the power cable from the printer and wait a few seconds. Plug in the power cable again and check if the Error Code has disappeared. If the error code continue |
| 08:11 |
Front Panel cannot be detected. |
Reconnect the Front Panel. |
| 11:10 |
Trailing Cable Failure. |
Replace the Carriage Assembly. Replace the Electronics Module |
| 11:11 |
Trailing Cable is badly connected. |
Reconnect the Trailing Cable correctly to the Electronics Module.
If the Error Code continues, replace the Carriage Assembly |
| 21:10 |
Service Station failure. |
Replace the Service Station Assembly |
| 22:10 |
Ink Supply Station failure. |
Replace the Ink Supply Station |
| 270:00 |
Color Calibration Failure - Color Calibration cancelled. |
Clean the electrical contacts on the black printhead.
If the error code continues, replace the black printhead. |
| 271:00 |
Color Calibration Failure - Color Calibration cancelled. |
Clean the electrical contacts on the cyan printhead.
If the error code continues, replace the cyan printhead. |
| 272:00 |
Color Calibration Failure - Color Calibration cancelled. |
Clean the electrical contacts on the magenta printhead.
?If the error code continues, replace the magenta printhead. |
| 273:00 |
Color Calibration Failure - Color Calibration cancelled. |
Clean the electrical contacts on the yellow printhead.
?If the error code continues, replace the yellow printhead. |
.png){kind=small}
.png){kind=small}
.png){kind=small}
.png){kind=small}
.png){kind=small}
